forwarder	##### 2020-08-22 08:00:41 GMT #####
forwarder	### [UPSTREAM] ###
forwarder	# RF packets received by concentrator: 2
forwarder	# CRC_OK: 0.00%, CRC_FAIL: 100.00%, NO_CRC: 0.00%
forwarder	# RF packets forwarded: 0 (0 bytes)
forwarder	# PUSH_DATA datagrams sent: 0 (0 bytes)
forwarder	# PUSH_DATA acknowledged: 0.00%
forwarder	### [DOWNSTREAM] ###
forwarder	# PULL_DATA sent: 3 (0.00% acknowledged)
forwarder	# PULL_RESP(onse) datagrams received: 0 (0 bytes)
forwarder	# RF packets sent to concentrator: 0 (0 bytes)
forwarder	# TX errors: 0
forwarder	# BEACON queued: 0
forwarder	src/jitqueue.c:448:jit_print_queue(): INFO: [jit] queue is empty
forwarder	# BEACON sent so far: 0
forwarder	# BEACON rejected: 0
forwarder	### [JIT] ###
forwarder	# SX1301 time (PPS): 2471084
forwarder	### [GPS] ###
forwarder	# GPS sync is disabled
forwarder	##### END #####


forwarder	JSON up: {"stat":{"time":"2020-08-22 08:00:41 GMT","rxnb":2,"rxok":0,"rxfw":0,"ackr":0.0,"dwnb":0,"txnb":0}}
forwarder	INFO: [down] the last 3 PULL_DATA were not ACKed, exiting application
forwarder	INFO: End of downstream thread


forwarder	##### 2020-08-22 08:01:11 GMT #####
forwarder	### [UPSTREAM] ###
forwarder	# RF packets received by concentrator: 0
forwarder	# CRC_OK: 0.00%, CRC_FAIL: 0.00%, NO_CRC: 0.00%
forwarder	# RF packets forwarded: 0 (0 bytes)
forwarder	# PUSH_DATA datagrams sent: 1 (111 bytes)
forwarder	# PUSH_DATA acknowledged: 0.00%
forwarder	### [DOWNSTREAM] ###
forwarder	# PULL_DATA sent: 0 (0.00% acknowledged)
forwarder	# PULL_RESP(onse) datagrams received: 0 (0 bytes)
forwarder	# RF packets sent to concentrator: 0 (0 bytes)
forwarder	# TX errors: 0
forwarder	# BEACON queued: 0
forwarder	# BEACON sent so far: 0
forwarder	# BEACON rejected: 0
forwarder	### [JIT] ###
forwarder	# SX1301 time (PPS): 2471084
forwarder	INFO: End of upstream thread
forwarder	### [GPS] ###
forwarder	src/jitqueue.c:448:jit_print_queue(): INFO: [jit] queue is empty
forwarder	# GPS sync is disabled
forwarder	##### END #####


forwarder	INFO: concentrator stopped successfully
forwarder	INFO: Exiting packet forwarder program
forwarder	*** UDP Packet Forwarder v5.0.2 ***
forwarder	*** UDP Packet Forwarder v5.0.2 ***
forwarder	*** Lora concentrator HAL library, Version: 5.0.1; ***
forwarder	*** Lora concentrator HAL library, Version: 5.0.1; ***
forwarder	INFO: Little endian host
forwarder	INFO: looking for hardware configuration file at '/etc/opt/udp-packet-forwarder/hardware/hardware_conf.json'
forwarder	INFO: found hardware configuration file /etc/opt/udp-packet-forwarder/hardware/hardware_conf.json
forwarder	INFO: Checking signature with 2 public keys
forwarder	TRACE: [verify] Checking RSA signature
forwarder	INFO: [verify] Signature is NOT valid
forwarder	TRACE: [verify] Checking RSA signature
forwarder	INFO: [verify] Signature is valid
forwarder	INFO: hardware configuration file signature is valid, parsing configuration /etc/opt/udp-packet-forwarder/hardware/hardware_conf.json
forwarder	INFO: /etc/opt/udp-packet-forwarder/hardware/hardware_conf.json does contain a JSON object named hardware_conf, parsing SX1301 parameters
forwarder	WARNING: Data type for lorawan_public seems wrong, please check
forwarder	INFO: no configuration for LBT
forwarder	INFO: antenna_gain 0 dBi
forwarder	INFO: radio 0 enabled (type SX1257), center frequency 0 (may be overriden), RSSI offset -164.000000, tx enabled 1
forwarder	INFO: radio 1 enabled (type SX1257), center frequency 0 (may be overriden), RSSI offset -164.000000, tx enabled 0
forwarder	INFO: found channels configuration file /etc/opt/udp-packet-forwarder/channels/channels_conf.json, parsing it
forwarder	INFO: /etc/opt/udp-packet-forwarder/channels/channels_conf.json does contain a JSON object named radio, parsing SX1301 parameters
forwarder	INFO: radio 0 frequency override : 867500000 Hz
forwarder	INFO: radio 1 frequency override : 868500000 Hz
forwarder	INFO: /etc/opt/udp-packet-forwarder/channels/channels_conf.json does contain a JSON object named channels_conf, parsing SX1301 parameters
forwarder	INFO: Lora multi-SF channel 0> radio 1, IF -400000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 1> radio 1, IF -200000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 2> radio 1, IF 0 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 3> radio 0, IF -400000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 4> radio 0, IF -200000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 5> radio 0, IF 0 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 6> radio 0, IF 200000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 7> radio 0, IF 400000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora std channel> radio 1, IF -200000 Hz, 250000 Hz bw, SF 7
forwarder	INFO: FSK channel> radio 1, IF 300000 Hz, 125000 Hz bw, 50000 bps datarate
forwarder	INFO: found global configuration file /etc/opt/udp-packet-forwarder/gateway/generic/gateway_global_conf.json, parsing it
forwarder	INFO: /etc/opt/udp-packet-forwarder/gateway/generic/gateway_global_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters
forwarder	INFO: the forwarder is lorawan_public
forwarder	INFO: server hostname or IP address is configured to "localhost"
forwarder	INFO: upstream port is configured to "1680"
forwarder	INFO: downstream port is configured to "1680"
forwarder	INFO: downstream keep-alive interval is configured to 10 seconds
forwarder	INFO: statistics display interval is configured to 30 seconds
forwarder	INFO: upstream PUSH_DATA time-out is configured to 100 ms
forwarder	INFO: packets received with a valid CRC will be forwarded
forwarder	INFO: packets received with a CRC error will NOT be forwarded
forwarder	INFO: packets received with no CRC will NOT be forwarded
forwarder	INFO: GPS serial port path is configured to ""
forwarder	INFO: Auto-quit after 3 non-acknowledged PULL_DATA
forwarder	INFO: found local configuration file /etc/opt/udp-packet-forwarder/gateway/generic/gateway_local_conf.json, parsing it
forwarder	INFO: redefined parameters will overwrite global parameters
forwarder	INFO: /etc/opt/udp-packet-forwarder/gateway/generic/gateway_local_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters
forwarder	INFO: gateway MAC address is configured to FCC23DFFFE20DF8A
forwarder	INFO: the forwarder is lorawan_public
forwarder	INFO: server hostname or IP address is configured to "eu.thethings.network"
forwarder	INFO: upstream port is configured to "1700"
forwarder	INFO: downstream port is configured to "1700"
forwarder	INFO: packets received with a valid CRC will be forwarded
forwarder	INFO: packets received with a CRC error will NOT be forwarded
forwarder	INFO: packets received with no CRC will NOT be forwarded
forwarder	INFO: Reference latitude is configured to 59.153831 deg
forwarder	INFO: Reference longitude is configured to 10.248845 deg
forwarder	INFO: Reference altitude is configured to 40 meters
forwarder	INFO: lorawan_public 1, clksrc 1
forwarder	INFO: LBT is disabled
forwarder	INFO: Configuring TX LUT with 16 indexes
forwarder	INFO: Configuring RF chains
forwarder	INFO: [main] concentrator started, packet can now be received
forwarder	INFO: Disabling GPS mode for concentrator's counter...
forwarder	INFO: host/sx1301 time offset=(1598083278s:999666µs) - drift=-1037397902µs
forwarder	INFO: Enabling GPS mode for concentrator's counter.


forwarder	##### 2020-08-22 08:01:51 GMT #####
forwarder	### [UPSTREAM] ###
forwarder	# RF packets received by concentrator: 0
forwarder	# CRC_OK: 0.00%, CRC_FAIL: 0.00%, NO_CRC: 0.00%
forwarder	# RF packets forwarded: 0 (0 bytes)
forwarder	# PUSH_DATA datagrams sent: 0 (0 bytes)
forwarder	# PUSH_DATA acknowledged: 0.00%
forwarder	### [DOWNSTREAM] ###
forwarder	# PULL_DATA sent: 3 (0.00% acknowledged)
forwarder	# PULL_RESP(onse) datagrams received: 0 (0 bytes)
forwarder	# RF packets sent to concentrator: 0 (0 bytes)
forwarder	# TX errors: 0
forwarder	# BEACON queued: 0
forwarder	# BEACON sent so far: 0
forwarder	# BEACON rejected: 0
forwarder	### [JIT] ###
forwarder	# SX1301 time (PPS): 2464024
forwarder	### [GPS] ###
forwarder	src/jitqueue.c:448:jit_print_queue(): INFO: [jit] queue is empty
forwarder	# GPS sync is disabled
forwarder	##### END #####


forwarder	JSON up: {"stat":{"time":"2020-08-22 08:01:51 GMT","rxnb":0,"rxok":0,"rxfw":0,"ackr":0.0,"dwnb":0,"txnb":0}}
forwarder	INFO: [down] the last 3 PULL_DATA were not ACKed, exiting application
forwarder	INFO: End of downstream thread


forwarder	##### 2020-08-22 08:02:21 GMT #####
forwarder	### [UPSTREAM] ###
forwarder	# RF packets received by concentrator: 0
forwarder	# CRC_OK: 0.00%, CRC_FAIL: 0.00%, NO_CRC: 0.00%
forwarder	# RF packets forwarded: 0 (0 bytes)
forwarder	# PUSH_DATA datagrams sent: 1 (111 bytes)
forwarder	# PUSH_DATA acknowledged: 0.00%
forwarder	### [DOWNSTREAM] ###
forwarder	# PULL_DATA sent: 0 (0.00% acknowledged)
forwarder	# PULL_RESP(onse) datagrams received: 0 (0 bytes)
forwarder	# RF packets sent to concentrator: 0 (0 bytes)
forwarder	# TX errors: 0
forwarder	# BEACON queued: 0
forwarder	# BEACON sent so far: 0
forwarder	# BEACON rejected: 0
forwarder	### [JIT] ###
forwarder	# SX1301 time (PPS): 2464024
forwarder	INFO: End of upstream thread
forwarder	### [GPS] ###
forwarder	src/jitqueue.c:448:jit_print_queue(): INFO: [jit] queue is empty
forwarder	# GPS sync is disabled
forwarder	INFO: concentrator stopped successfully
forwarder	##### END #####


forwarder	INFO: Exiting packet forwarder program
forwarder	*** UDP Packet Forwarder v5.0.2 ***
forwarder	*** UDP Packet Forwarder v5.0.2 ***
forwarder	*** Lora concentrator HAL library, Version: 5.0.1; ***
forwarder	*** Lora concentrator HAL library, Version: 5.0.1; ***
forwarder	INFO: Little endian host
forwarder	INFO: looking for hardware configuration file at '/etc/opt/udp-packet-forwarder/hardware/hardware_conf.json'
forwarder	INFO: found hardware configuration file /etc/opt/udp-packet-forwarder/hardware/hardware_conf.json
forwarder	INFO: Checking signature with 2 public keys
forwarder	TRACE: [verify] Checking RSA signature
forwarder	INFO: [verify] Signature is NOT valid
forwarder	TRACE: [verify] Checking RSA signature
forwarder	INFO: [verify] Signature is valid
forwarder	INFO: hardware configuration file signature is valid, parsing configuration /etc/opt/udp-packet-forwarder/hardware/hardware_conf.json
forwarder	INFO: /etc/opt/udp-packet-forwarder/hardware/hardware_conf.json does contain a JSON object named hardware_conf, parsing SX1301 parameters
forwarder	WARNING: Data type for lorawan_public seems wrong, please check
forwarder	INFO: no configuration for LBT
forwarder	INFO: antenna_gain 0 dBi
forwarder	INFO: radio 0 enabled (type SX1257), center frequency 0 (may be overriden), RSSI offset -164.000000, tx enabled 1
forwarder	INFO: radio 1 enabled (type SX1257), center frequency 0 (may be overriden), RSSI offset -164.000000, tx enabled 0
forwarder	INFO: found channels configuration file /etc/opt/udp-packet-forwarder/channels/channels_conf.json, parsing it
forwarder	INFO: /etc/opt/udp-packet-forwarder/channels/channels_conf.json does contain a JSON object named radio, parsing SX1301 parameters
forwarder	INFO: radio 0 frequency override : 867500000 Hz
forwarder	INFO: radio 1 frequency override : 868500000 Hz
forwarder	INFO: /etc/opt/udp-packet-forwarder/channels/channels_conf.json does contain a JSON object named channels_conf, parsing SX1301 parameters
forwarder	INFO: Lora multi-SF channel 0> radio 1, IF -400000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 1> radio 1, IF -200000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 2> radio 1, IF 0 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 3> radio 0, IF -400000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 4> radio 0, IF -200000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 5> radio 0, IF 0 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 6> radio 0, IF 200000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora multi-SF channel 7> radio 0, IF 400000 Hz, 125 kHz bw, SF 7 to 12
forwarder	INFO: Lora std channel> radio 1, IF -200000 Hz, 250000 Hz bw, SF 7
forwarder	INFO: FSK channel> radio 1, IF 300000 Hz, 125000 Hz bw, 50000 bps datarate
forwarder	INFO: found global configuration file /etc/opt/udp-packet-forwarder/gateway/generic/gateway_global_conf.json, parsing it
forwarder	INFO: /etc/opt/udp-packet-forwarder/gateway/generic/gateway_global_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters
forwarder	INFO: the forwarder is lorawan_public
forwarder	INFO: server hostname or IP address is configured to "localhost"
forwarder	INFO: upstream port is configured to "1680"
forwarder	INFO: downstream port is configured to "1680"
forwarder	INFO: downstream keep-alive interval is configured to 10 seconds
forwarder	INFO: statistics display interval is configured to 30 seconds
forwarder	INFO: upstream PUSH_DATA time-out is configured to 100 ms
forwarder	INFO: packets received with a valid CRC will be forwarded
forwarder	INFO: packets received with a CRC error will NOT be forwarded
forwarder	INFO: packets received with no CRC will NOT be forwarded
forwarder	INFO: GPS serial port path is configured to ""
forwarder	INFO: Auto-quit after 3 non-acknowledged PULL_DATA
forwarder	INFO: found local configuration file /etc/opt/udp-packet-forwarder/gateway/generic/gateway_local_conf.json, parsing it
forwarder	INFO: redefined parameters will overwrite global parameters
forwarder	INFO: /etc/opt/udp-packet-forwarder/gateway/generic/gateway_local_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters
forwarder	INFO: gateway MAC address is configured to FCC23DFFFE20DF8A
forwarder	INFO: the forwarder is lorawan_public
forwarder	INFO: server hostname or IP address is configured to "eu.thethings.network"
forwarder	INFO: upstream port is configured to "1700"
forwarder	INFO: downstream port is configured to "1700"
forwarder	INFO: packets received with a valid CRC will be forwarded
forwarder	INFO: packets received with a CRC error will NOT be forwarded
forwarder	INFO: packets received with no CRC will NOT be forwarded
forwarder	INFO: Reference latitude is configured to 59.153831 deg
forwarder	INFO: Reference longitude is configured to 10.248845 deg
forwarder	INFO: Reference altitude is configured to 40 meters
forwarder	INFO: lorawan_public 1, clksrc 1
forwarder	INFO: LBT is disabled
forwarder	INFO: Configuring TX LUT with 16 indexes
forwarder	INFO: Configuring RF chains
forwarder	INFO: [main] concentrator started, packet can now be received
forwarder	INFO: Disabling GPS mode for concentrator's counter...
forwarder	INFO: host/sx1301 time offset=(1598083348s:996357µs) - drift=-967401211µs
forwarder	INFO: Enabling GPS mode for concentrator's counter.
forwarder	##### 2020-08-22 08:03:01 GMT #####
forwarder	### [UPSTREAM] ###
forwarder	# RF packets received by concentrator: 0
forwarder	# CRC_OK: 0.00%, CRC_FAIL: 0.00%, NO_CRC: 0.00%
forwarder	# RF packets forwarded: 0 (0 bytes)
forwarder	# PUSH_DATA datagrams sent: 0 (0 bytes)
forwarder	# PUSH_DATA acknowledged: 0.00%
forwarder	### [DOWNSTREAM] ###
forwarder	# PULL_DATA sent: 3 (0.00% acknowledged)
forwarder	# PULL_RESP(onse) datagrams received: 0 (0 bytes)
forwarder	# RF packets sent to concentrator: 0 (0 bytes)
forwarder	# TX errors: 0
forwarder	# BEACON queued: 0
forwarder	# BEACON sent so far: 0
forwarder	# BEACON rejected: 0
forwarder	### [JIT] ###
forwarder	# SX1301 time (PPS): 2461704
forwarder	### [GPS] ###
forwarder	src/jitqueue.c:448:jit_print_queue(): INFO: [jit] queue is empty
forwarder	# GPS sync is disabled
forwarder	##### END #####
forwarder	JSON up: {"stat":{"time":"2020-08-22 08:03:01 GMT","rxnb":0,"rxok":0,"rxfw":0,"ackr":0.0,"dwnb":0,"txnb":0}}
forwarder	INFO: [down] the last 3 PULL_DATA were not ACKed, exiting application
forwarder	INFO: End of downstream thread
forwarder	##### 2020-08-22 08:03:31 GMT #####
forwarder	### [UPSTREAM] ###
forwarder	# RF packets received by concentrator: 0
forwarder	# CRC_OK: 0.00%, CRC_FAIL: 0.00%, NO_CRC: 0.00%
forwarder	# RF packets forwarded: 0 (0 bytes)
forwarder	# PUSH_DATA datagrams sent: 1 (111 bytes)
forwarder	# PUSH_DATA acknowledged: 0.00%
forwarder	### [DOWNSTREAM] ###
forwarder	# PULL_DATA sent: 0 (0.00% acknowledged)
forwarder	# PULL_RESP(onse) datagrams received: 0 (0 bytes)
forwarder	# RF packets sent to concentrator: 0 (0 bytes)
forwarder	# TX errors: 0
forwarder	# BEACON queued: 0
forwarder	# BEACON sent so far: 0
forwarder	# BEACON rejected: 0
forwarder	### [JIT] ###
forwarder	# SX1301 time (PPS): 2461704
forwarder	INFO: End of upstream thread
forwarder	### [GPS] ###
forwarder	src/jitqueue.c:448:jit_print_queue(): INFO: [jit] queue is empty
forwarder	# GPS sync is disabled
forwarder	INFO: concentrator stopped successfully
forwarder	##### END #####
forwarder	INFO: Exiting packet forwarder program