Hello,
Today around 2018-04-24T22:30:00Z until now all my multitech conduit AEP was ‘not connected’ same time on TTN plateform. I use multitech firmware (1.4.16) and lora_pkt_fwd (3.0.20-r1)
Here is a copy of the logs of one of my multitech :
##### 2018-04-24 23:03:08 GMT ##### ### [UPSTREAM] ### # RF packets received by concentrator: 1 # CRC_OK: 100.00%, CRC_FAIL: 0.00%, NO_CRC: 0.00% # RF packets forwarded: 1 (29 bytes) # PUSH_DATA datagrams sent: 0 (0 bytes) # PUSH_DATA acknowledged: 0.00% ### [DOWNSTREAM] ### # PULL_DATA sent: 0 (0.00% acknowledged) # PULL_RESP(onse) datagrams received: 0 (0 bytes) # RF packets sent to concentrator: 0 (0 bytes) # TX errors: 0 ### BEACON IS DISABLED! ### [JIT] ### # INFO: JIT queue contains 0 packets. # INFO: JIT queue contains 0 beacons. ### GPS IS DISABLED! ### [PERFORMANCE] ### # Upstream radio packet quality: 100.00%. ### [ CONNECTIONS ] ### # bridge.eu.thethings.network: Connected # Semtech status report send. ##### END ##### 01:03:08 INFO: [TTN] bridge.eu.thethings.network RTT 300 01:03:09 INFO: [TTN] send status success for bridge.eu.thethings.network lgw_receive:1165: FIFO content: 1 ae 3 5 3b lgw_receive:1184: [5 17] Note: LoRa packet 01:03:37 INFO: [up] TTN lora packet send to server "bridge.eu.thethings.network"
Multitech seems to be OK, bridge.eu.thethings.network: Connected ? but not connected on TTN server side , why ? Is it a problem TTN server side ?
Best regards,
Ecoadapt