The NodeMCU Lora board calls out to be protected and to sit stable. If you used the Hallard board then you can print this housing I designed. The STL file is available here:
https://dl.dropboxusercontent.com/u/1724759/LoRa_PCB_Holder.stl
![](https://thethingsnetwork.org/media/posts/1805419a4bbd446b94f304624511ced5.large.jpg)
The NodeMCU Lora board calls out to be protected and to sit stable. If you used the Hallard board then you can print this housing I designed. The STL file is available here:
https://dl.dropboxusercontent.com/u/1724759/LoRa_PCB_Holder.stl